Re: RE Spooling

[Michael Norman michael.norman@xxxxxxxx]

At 1/31/2004 01:14 PM -0500, Patricia M Godfrey wrote:
> Michael, how is the printer connected to the PC? Must be parallel port,
> if you're printing under 9x. Since you're having problems in Windows too,
> it occurs to me that it might be a good idea to check your parallel port
> settings, first in Control Panel, then in the BIOS Setup. You want either
> ECP or PPP, and experiment with bidirectional mode turned on and off and
> see what happens. What works in these cases is often pretty much by guess
> and by gosh.
> Patricia
Many thanks, Ma'am. Yes, parallel. I will switch from RAW to ECP forthwith
then play with the bidirectional setting. And, of course, report.

Michael Norman