[Date Prev][Date Next][Subject Prev][Subject Next][ Date Index][ Subject Index]

Re: Re clip will not work on new Windows 98 installation



** Reply to message from Paul Breeze  on Thu, 2 Sep
2004 13:36:17 +0100


> the new frame made no difference in XY4. I also made sure
> I had the latest copy of CLIP.EXE

Check:
-----
MSVBVM60.DLL in C:\WINDOWS\SYSTEM (file dated 2/23/04)
*One* copy of XYWWWEB.REG on the machine (check every drive:
 "DIR d:\XYWWWEB.REG /S /P" )
*One* line only with an "EXE_or_VBS=" spec in REG
Set "EXE_or_VBS=E" (then *SAve* REG!)
CLIP.EXE in the *same dir* as Editor
CLIP.TXT, if exists, has no ATTRIButes (Hidden, Read-Only, etc.)
 (command "ATTRIB CLIP.TXT" in DOS)
C:\WINDOWS\SYSTEM and Editor's dir are both in the PATH

If all that checks out OK, then:

Manual Debug of CLIP (stop at any point, and report, if error!):
------ -----
1. DeFine and Clip some text from XyWrite
2. Open separate DOS window in Editor's dir
3. At DOS prompt, command "TYPE CLIP.TXT" to see if it contains your clipping
4. At DOS prompt, command "CLIP.EXE"
5. At DOS prompt, hit Alt-spacebar-E-P to see if CLIP.EXE
  successfully copied the text in CLIP.TXT to the system Clipboard
 (it should be pasted to the DOS prompt)
6. At DOS prompt, command "DEL CLIP.TXT"
7. At DOS prompt, command "CLIP.EXE"
8. At DOS prompt, command "TYPE CLIP.TXT" to see if CLIP.EXE pasted your
clipping
9. Return to XyWrite and Paste some text into Xywrite

-----------------------------
Robert Holmgren
holmgren@xxxxxxxx
-----------------------------