Re: printer problem

[Nicholas Clifford clifford@xxxxxxxx]

In XyIII+ I think Control-F9 is what you want. That at any rate opens
the file in expanded view once it's called upo.

Nick Clifford

tgieske wrote:

> How about control F8? That's what it is on xywin4.
>
> At 06:03 PM 10/09/1999 -0400, you wrote:
> >Tom--
> >
> >for expanded mode, are you thinking of alt+v(for view), then e(for
> >expanded)? There may be a quicker way, but I can't remember.
> >
> >Judith Davidsen
> >--------
> >Tom Robertson wrote:
> >
> >> Hey Folks:
> >>
> >> I just discovered that I do not know how to tell this person how
> >> to go to expanded mode to see where that little errant code is
> >> that is driving him crazy. Some 15 years ago, I set up my own
> >> keyboard and have no idea what the "normal" key is for expanded
> >> mode.
> >>
> >> Can someone help this poor soul.
> >>
> >> TR...
> >>
> >> -----Original Message-----
> >> From: owner-xywrite@xxxxxxxx
> >> [mailto:owner-xywrite@xxxxxxxx]On Behalf Of
> >> Brucefelk@xxxxxxxx
> >> Sent: Friday, October 08, 1999 3:22 PM
> >> To: xywrite@xxxxxxxx
> >> Subject: printer problem
> >>
> >> Xyquestrians, Xybernauts, Xysters:
> >>
> >> Some sort of glitch has inserted itself into my printing process.
> >> When I
> >> print a document of two or more pages, p 1 comes out fine, but p
> >> 2 comes out
> >> printed 5 characters wide down the right-hand edge of the paper.
> >> P 3 (and
> >> successive alternate pp follow the same pattern: 3 normal, 4 the
> >> narrow
> >> strip. . . .
> >>
> >> I am presently using Xy 4.011 in a Pentium 75 mhz machine with 40
> >> mb RAM, and
> >> an NEC 860 laser printer. Running Xydos within Win 98, (and
> >> 4.011 because
> >> I've not yet been able to get 4.017 reinstalled since "upgrading
> >> (!)" to Win
> >> 98; I intend to address that problem when I get some free time.).
> >>
> >> I've checked to ascertain that I did not leave columns turned on
> >> last time I
> >> used it, and that my settings.dfl file is okay as to margins,
> >> offsets, etc.
> >> I've also checked printer settings, but find things *looking*
> >> normal.
> >>
> >> M'aidez, s.v.p.!
> >>               Bruce Felknor
> >
> >
> >
> Tony G.