[Date Prev][Date Next][Subject Prev][Subject Next][ Date Index][ Subject Index]

Re: HP Printer files



** Reply to message from michael.norman@xxxxxxxx on Sun, 05 Jan 2003 12:55:44
-0500

> I'll stick with HPLJ-4.PRN, as you suggest.

Not suggesting! My HPLJ-4 had a lot of tweaks. I didn't see much difference
in PLUS, so... path of least resistance. Either one works fine.

> Should I set the d:\path for .bin in 4.PRN (I did not do that
> in my 3P.PRN; if yes in 4.PRN

Yes

> where should it go?

PR=D:\XY4\WHERE\ELSE\BUT\HERE?\LJ4.BIN,LJ4

> and, I assume you
> recommend the replacement FB< code for both PLUS.PRN and 4.RPN, right?

If using a 600+ dpi printer, yes -- if not, NO! Don't delete the statement
you're replacing, just comment it out (leading semi-colon) -- I haven't printed
XyWrite to a 2200D, so you're on your own here, and might want to revert.

> That replacement forces 600 dpi?

Of course. Look in the printer file, Michael! Everything is already explained
there, all I did (in my XPLeNCODEd line) was format it correctly so the printer
can accept it. If you want to prove that 600dpi makes a difference, compare
XyW output of 3P and 2200D under a magnifier or loupe...

> Finally, what to suggest I copy
> from HP4-PLUS.PRN into HPLJ-4.PRN, if anything?

If you use HP4-PLUS.PRN, you don't have to copy anything. Path of least
resistance.

-----------------------------
Robert Holmgren
holmgren@xxxxxxxx
-----------------------------