[Date Prev][Date Next][Subject Prev][Subject Next][ Date Index][ Subject Index]

Re: configure Xywrite for USB printer?



Harry Binswanger wrote:
If you are NOT using XP, it's difficult--best to move the file (by copy and paste if there's no formatting) to a Windows program (e.g., Notepad).
Actually, according to what Robert said when we discussed and tested this a while back, it should work in W2K too. It's only the 9x flavors that won't let you map a USB port on the same PC (they'll let you do it over a network) to an LPT port. And of course PhostGhost works anywhere for any kind of printer. Harry's expedient will only work if the printer is HP (or, of course, Postscript or Epson ESC/P, but they don't make them any more) compatible. If you go for PostGhost, you have to get Alladin Ghostscript (freeware) and R. Lang's Gsview (nagware, but worth every cent). Do Xysearch for TYP and Postghost; I attach Robert's most recent (I think) explanation of setting things up, slightly edited to remove some comments meant for the recipient's unique situation: >> Download and install Ghostscript and GSview: ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/AFPL/gs853/gs853w32.exe and ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/ghostgum/gsv47w32.exe Just execute the two EXEs and they will install themselves. Execute gs853w32.exe first, then gsv47w32.exe. Technically, you don't need GSview if you're only printing, but it's a very handy file to have for other purposes, so install it too. Next, go into XYWWWEB.REG and find the stanza called "[Ghostscript]". Enter the fully-qualified d:\path\filespec for GSWIN32C.EXE in the variable named "Ghostscript_EXE_Win32=". It should be something like, I dunno, maybe "Ghostscript_EXE_Win32=C:\PROGRA~1\GS\GS8.53\BIN\GSWIN32C.EXE". Do the same thing for "GSView_Win32=C:\PROGRA~1\GS\GSVIEW\GSVIEW32.EXE" or whatever it actually is. Remember: these must both be entered as 8.3 filespecs, no Long File Names! Fully-qualified (the whole schmeer, from "C:" to the filename). One easy way to get the 8.3 ShortFileName is to navigate in a XyWrite dir display to the file e.g. GSWIN32C.EXE, put your cursor on the file, then command on CMline: SFN. The full short d:\path\filename will appear in a PRompt. Now go into Control Panel ==> Printers and make sure that [the printer you want to use] is the *default* Windows printer. Right click on it and set it as Default. In REG again, make sure that the line saying "GsPrnDev=mswinpr2 default" is the *only* GsPrnDev= line (if you have more than one) that is enabled (i.e. doesn't have a semi-colon in front of it). CAll POSTFONT.TST into a XyWrite window. [Ca SETTINGS.DFL or Startup.int, whichever has your PP table in it, usually at the end. Make sure that Postghst.prn is listed as one of the printers. If not, add it, according to the pattern of the others. Note its number.] Command on the CMline: SETP N [Where N is the number of Postghst.prn.] You should run this instruction in STARTUP.INT so that it executes automatically, always, hands-off, when you launch. With POSTFONT.TST in the current window, command: TYP Wait a few seconds and POSTFONT.TST will print on paper. It will display the available fonts and font names; you can identify them in the Format ==> Typeface menu because they have an up-and-down arrow after their names (BOOKMAN, CHARTER, TIMES, etc -- the "standard 35" Postscript fonts). When you print your own files (always using the TYP command), embed one or more of these fonts in your file -- or make one of them XyWrite's default font. If you want just to display a file as it looks under Ghostscript, but without printing it, instead of TYP you should command: POSTGHOST (Try it!) << End of RH's post; items in [] are my additions. -- Patricia M. Godfrey PriscaMG@xxxxxxxx