[Date Prev][Date Next][Subject Prev][Subject Next][
Date Index][
Subject Index]
Re: Testing printing with vDosXy 500
- Subject: Re: Testing printing with vDosXy 500
- From: Kari Eveli lexitec@xxxxxxxx
- Date: Sun, 11 Feb 2018 18:23:21 +0200
Jordan,
If you have an old DOS printer connected to LPT1, you can use the raw
print option. Otherwise GhostPCL is your best bet, and as a bonus, it
offers a really nice print preview. When using Xy4, You may achieve
better results with a PCL printer file (e.g. PCL.PR4). And for Xy3, I
recommend the new PCL_LTR.PR3, PCL_LGL.PR3 and PCL_A4.PR3. The installer
does not have these, they are are a separate download
(http://www.lexitec.fi/xywrite/PCL_print_files_for_XY3.zip).
Best regards,
Kari Eveli
LEXITEC Book Publishing (Finland)
lexitec@xxxxxxxx
*** Lexitec Online ***
Lexitec in English: http://www.lexitec.fi/english.html
Home page in Finnish: http://www.lexitec.fi/
J R FOX kirjoitti 10.2.2018 klo 23:46:
So I'm thinking this might actually work, with some further guidance and
fine-tuning. It would be nicer if this was
one-shot-seamless-from-XyWrite, without multiple steps jumping from
program to program . . . but I don't want to be asking for too much
here. Wireless printing may be a further wrinkle. I want to make sure
this whole deal is ready for Prime Time though, before I commit it to
the office, and Xy-3. Pitfalls to watch out for ?
Jordan