Secure Connection Failed
An error occurred during a connection to www.lexitec.fi. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
Paul,
Thanks for the information. I have been experimenting with two-sided
printing and laminating the result. It is difficult to get to the
original measurements with a regular A4/Letter-size printer (the
template is a bit too wide). However, I have managed to make a workable
solution.
I used Xara Publisher to align the two pages perfectly, and Acrobat X to
print on an Epson printer. I set it up on Letter-sized paper but it
prints ok on A4, the Letter-sized version may be a bit smaller. After
printing, I laminated it and cut it to size. I think the result is very
nice. Edward Mendelson sent me both sides of the Template, so this
template now has both Xy3 and Xy4 keys. Edward also tipped me on how to
fix Acrobat X on Win10. Thank to you, Lisa and Edward, and my tinkering,
the templates could be revived.
https://www.lexitec.fi/xywrite/Xy_Keyboard_Templates.zip
Best regards,
Kari Eveli
LEXITEC Book Publishing (Finland)
lexitec@xxxxxxxxxx
*** Lexitec Online ***
Lexitec in English: https://www.lexitec.fi/english.html
Lexitec English and Finnish dictionaries: https://sk.lexitec.fi/en/
Home page in Finnish: https://www.lexitec.fi/
> Kari, The long keyboard template image I sent you is 295mm including the
> Xyquest tab on the left hand end and 54mm wide. There is a blank tab on
> the right hand end that is not included in the scan (it will not fit on
> the scanner bed) which is 45mm. I would think you could probably omit
> both end tabs, in which case the width of the template itself is 251mm.
> The other template is 123 x 67 mm.
>
> Best wishes
>
> Paul